Private Eye Parts Kit - 22LR Revolver
Everything you need to complete HulkHogan & Richard-Nixon's Private Eye 22LR Revolver.
A portion of every kit purchased is donated to the developers.
Only Qualified gunsmiths should attempt to build any firearm.
- Kit does not ship to NJ or International.
All our Kits are backed by our 100% Quality Guarantee.
We ship our products via USPS to save you money.
|M3x20 screws (1 needs to be sharpened for a firing pin)||16|
|M3x22 screws (for trigger and hammer)||2|
|M3 locking nuts (for trigger and hammer screws)||2|
|M3x8 screw (trim to ~7mm in length)||1|
|4mm dowel pin/rod, minimum 40mm length||1|
|1.500" sections of barrel liner||6|
|2.5" section of barrel liner||1|
|Alignment/Locking Arm Spring 0.625" Long, 0.240" OD, 0.204" ID||1|
|Trigger Spring 0.440" Long, 0.180" OD, 0.152" ID||1|
|Hammer Spring 12" Long, 0.328" OD (must cut to ~1.75" length)||1|
|Index Arm Spring 90 Degree, 0.235" OD||1|