- New
XM 5.7
$169.00
Full kit for the XM5.7 by Rusty Shackleford. Comes with everything needed to build the gun including cerrosafe and SCS Plates. Launcher Addon Available.
Quality Assurance
All our Kits are backed by our 100% Quality Guarantee.
Delivery Policy
We ship our products via USPS to save you money.
Ultra-Low-Profile Socket Head Screws M3 x 0.5 x 10mm - x1
Cup-Point Set Screws M4 x 0.7 x 4mm - x1
Flat Head Screws M4 x 0.7 x 110mm - x2
High-Strength Steel Nylon-Insert Locknuts - x2
Heat-Set Inserts for Plastic Brass, M4 x 0.7 mm - x2
Compression Spring 1" Long, 0.125" OD, 0.081" ID - x1
Dowel Pin 52100 , 2 mm Diameter, 16 mm Long - x2
Compression Spring 1" Long, 0.156" OD, 0.124" ID - x1
Cerrosafe - x1
Compression Spring 11" Long, 0.24" OD, 0.178" ID - x2
Torsion Spring 180 Degree, 0.45" OD - x1
Headless Shoulder Screws 6.5 mm x 6 mm - x1
Linear Motion shaft 2.5mm Diameter, 300mm Long - x1
Linear Motion Shaft , 4 mm Diameter, 300 mm Long - x2
Black-Oxide Hex Drive Flat Head Screw M3 x 0.5 x 30mm - x1
Heat-Set Inserts for Plastic Brass, M3 x 0.5 mm, 4.3 mm - x1
High-Strength Steel Nylon-Insert Locknuts—Class 10 M4 - x3
Black-Oxide Socket Head Screw 1/4"-20 x 1-3/4" - x1
Button Head Hex Drive Screw M4 x 0.7 x 35mm - x1
Button Head Hex Drive Screw M4 x 0.7 x 50mm - x1
Button Head Hex Drive Screw M4 x 0.7 x 25mm - x1
High-Strength Steel Nylon-Insert Locknut - x1
Socket Head Screw M6 x 1 x 110mm - x1
socket Head Screw M5 x 0.8 x 45mm - x1
M5 x 0.8 Nylon Insert Locknut - x1
Black-Oxide Hex Drive Flat Head Screw M4 x 0.7 x 10mm - x4
Heat-Set Inserts for Plastic Brass, M4 x 0.7 mm, 4.7 mm - x4
Button Head Hex Drive Screw M4 x 0.7 x 15mm - x1
Heat-Set Inserts for Plastic Brass, M4 x 0.7 mm, 4.7 mm - x1
Flat-Tip Set Screws M3 x 0.5 x 25mm - x2
Compression Spring 1.5" Long, 0.24" OD, 0.182" ID - x1
Pack M4 T-Nut Screw Replacement Set - x8
Heat-Set Inserts for Plastic Brass, M4 x 0.7 mm, 4.7 mm - x2
Socket Head Screw, M4 x 0.7 mm Thread, 15 mm Long - x1
Socket Head Screw, M4 x 0.7 mm Thread, 50 mm Long - x1
Yellow Ender 3 Bed Spring - x1
AR Fire Control Group and Safety Selector - x1
XM5.7_Firing_Pin - x1
XM5.7_Bolt_Front_Plate_1 - x1
XM5.7_Bolt_Front_Plate_2 - x1
XM5.7_Bolt_Rear_Plate - x1
XM5.7_Extractor - x1
XM5.7_Charging_Handle_Lever_Bottom - x1
XM5.7_Charging_Handle_Lever_Middle - x1
XM5.7_Charging_Handle_Lever_Top - x1
XM5.7_Charging_Handle_Lower_Plate - x1
XM5.7_Charging_Handle_Middle_Plate - x1
XM5.7_Charging_Handle_Upper_Plate - x1
2 Items
16 other products in the same category:
Comments (0)
No customer reviews for the moment.
Full kit for the XM5.7 by Rusty Shackleford. Comes with everything needed to build the gun including cerrosafe and SCS Plates. Launcher Addon Available.