(Almost) Everything you need to build your own FGCZ9! This kit does not include a barrel option currently.
Some fabrication / trimming is required for the firing pin and springs.
All our Kits are backed by our 100% Quality Guarantee.
We ship our products via USPS to save you money.
|m4x15mm screws for the top of receiver (picatinny section)||4|
|m4x10mm round head screws (fastening handguard to upper receiver halves)||4|
|m3x15mm screw (ejector hinge)||1|
|m4x25 screws (rest of receiver)||8|
|4mmx32mm dowel pin (spring release)||1|
|m4x25 flat head screws (bolt asm, countersink tool required, pre-fabricated bolt will use just one for retaining the pin)||5|
|shaft collar for 3mm shaft, 7mm OD (for firing pin)||1|
|6mm OD 1mm wire thickness spring, 8.5mm long (firing pin spring)||1|
|3mmx100mm bar (firing pin stock)||1|
|1/4" OD rod, 6.5" long (BCG spring guide rod)||1|
|1/4-20 x ¾" (ar15 grip screw)||1|
|Compression Spring Stock, Spring-Tempered Steel, 11" Long, 0.36" OD, 0.266" ID (to be trimmed to final length)||1|
|10x50x66.68mm steel for bolt (3 foot stock)||1|
|1x0.313x3.039in for bolt (2 foot stock)||2|